Steroid Cycles for Novice

Leslee/ Sales Rep.

Email: leslee.li@landmarkchem.com

Skype: landmark-leslee

Landmark Nutraceuticals Co., Limited

NOVICE Steroid CYCLES AND GEAR CHOICE...those men not yet at their natural max.

Best to take single roids when you start out, and preferably testosterone for two reasons#1. you don't need to stack to see good results and #2. it is a good idea to get a good grasp on how you react to the best single hormone out there...testosterone( in the gains department and sides department)

Steroid CYCLE #1

Understanding that few want to take as little as 250 of test a week and most want to see gains as rapidly as possible I will then recommend 400-500mg of testosterone cypionate or enanthate per week for the newbie. DURATION 8-12 weeks with an equal time off.

Always have an estrogen blocker available like nolvadex at 20mg/day or at least clomid at 50mg/day...nolva works better though

You get the most even blood level by injecting these esters twice a week....so 200-250mg twice a week will be more than enough. 

SHORT CYCLE OPTION 4-6 weeks but with test prop at 100mg every other day....lots of shots though.

Steroid CYCLE OPTION #2.

D-bol only at 30mg/day in 4 divided dose and one just before bed.
The only roid that is better than test IN THE SHORT RUN is d-bol...a truly UNREAL steroid and a favorite for over 40 years. D-bol was discovered way back in 1956 and quickly became a favorite of the pro's. D-bol only cycles work VERY WELL so don't let anyone BS you about them. They have been done by many over the last 45 years.

Nolva on hand.

* limit time "on' d-bol to 6 weeks as it is 17aa and can be hard on the liver.

MYTH:..some say that the gains from d-bol do not last...this is BS....the truth is the gains IN WATER from d-bol don't last so it SEEMS lilke the muscle gains don't last. Any steroid taken at bodybuilding doses, even at newbie doses, is going to shut down HPTA all the way so you can see that this "loss of muscular gains" ideation makes no sence.

NOTE: There is one steroid that is quite mild androgenically but seems to result in delayed HPTA recovery IN SOME(not me btw) and it is not d-bol...it is nandrolone, commonly used in the deconate ester(DECA) We don't understand why some bro's have a little trouble recuperating from this roid but it is a fact non the less.


Steroid CYCLE #3.

Test cyp or enanthate at 400-500mg/week for 8-12 weeks
d-bol 30mg/day in divided dose for the first 4 weeks. 
This is a powerful combo indeed. The d-bol really gets things moving in a hurry.

Trouble with this stack is that you are going to experience a good deal of water retention and"bloat". An estrogen inhibitor like arimidex at .5-1mg/day might be a good idea....but now it is getting overly complicated for many novices.

Short cycle option....test prop 100mg every other day and d-bol 30mg/day for 4-6 weeks.

Have nolva on hand for sure! Estrogen inhibitors DO NOT work well for gyno protection...USE an estrogen blocker like nolva.

Steroid CYCLE #4 for the "gutsy" newbie

Test at 400mg/week
tren a 75mg every other day.
Really good stack but it requires a lot of injecting so you better get your research done in this regard. Can do it shot the short cycle too.

Steroid CYCLE #5.

A classic again...test/deca at 250mg each for 8-12 weeks

Steroid CYCLE #6

yet another proven winner
Deca at 400mg/week for 10 weeks 
d-bol 30mg/day for 4 weeks
really nice synergistic combo here.

After each cycle take at least an equal time "off" from gear to allow your system to fully normalize.

Injectable Recipes

Leslee/ Sales Rep.

Email: leslee.li@landmarkchem.com

Skype: landmark-leslee

Landmark Nutraceuticals Co., Limited

Some of the recipes below are our own formulation or formulations from the Labs that we supply.

All recipes here are for making 10ml (the equivalent of 1 x 10ml Vial, so if you wish to make 40ml multiply the recipe by four or 100ml multiply it by 10, by giving you the recipe for 10ml we make it easy for you to calculate the recipe for any quantity.*The Oil we recommend is Grapeseed Oil. We will abbreviate Benzyl Alcohol to BA and Benzyl Benzoate to BB.

Testosterone Enanthate 250mg/ml - 10ml
6.44ml Oil
2.5g Testosterone Enanthate Powder
0.2ml BA (2%)
1ml BB (10%)

Nandrolone Phenylpropionate (NPP) 100mg/ml - 10ml
6.92ml Oil
1g Nandrolone Phenylpropionate Powder
0.2ml BA (2%)
2ml BB (20%)

Nandrolone Phenylpropionate (NPP) 200mg/ml - 10ml
6.03ml Oil
2g Nandrolone Phenylpropionate Powder
0.2ml BA (2%)
2ml BB (20%)

Testosterone Propionate 100mg/ml - 10ml
6.89ml Oil
1g Testosterone Popionate Powder
0.2ml BA (2%)
2ml BB (20%)

Trenbolone Acetate 100mg/ml - 10ml
6.95ml Oil
1g Trenbolone Acetate*Powder
0.2ml BA (2%)
2ml BB (20%)

Masteron (Drostanolone Propionate) 100mg/ml - 10ml
6.95ml Oil
1g Drostanolone Propionate Powder
0.2ml BA (2%)
2ml BB (20%)

Equipose (Boldenone Undecylenate) 250mg/ml - 10ml
5.88ml Oil
2.5g Boldenone Undecylenate Liquid
0.2ml BA (2%)
1.8ml BB (18%)

Primobolan (Methenolone Enanthate) 100mg/ml - 10ml
6.95ml Oil
1g Methenolone Enanthate Powder
0.2ml BA (2%)
2ml BB (20%)

Deca Durabolin (Nandrolone Decanoate) 250mg/ml - 10ml
7.24ml Oil
2.5g Nandrolone Decanoate*Powder
0.3ml BA (3%)
1.5ml BB (15%)

Sustanon (Four Ester Testosterone Blend) 250mg/ml - 10ml
7.125ml Oil
0.3g Testosterone Propionate Powder
0.6g Testosterone Phenylpropionate Powder
0.6g Testosterone Isocaproate Powder
10g Testosterone Decanoate Powder
0.25ml BA (2.5%)
0.75ml BB (7.5%)

Injectable Stanozolol (Winstrol) Suspension 100mg/ml*- 10ml (UNTESTED)
6.25ml DISTILLED Water (ONLY DISTILLED WATER!)
1g Stanozolol
0.3ml BA (3%)
2.4ml BB (24%)
0.3ml PS80 (Polysorbate 80) (3%)

Combine Stanozolol Powder, BA, BB, PS80 and heat until clear whils swirling or using a stir bar
Filter slowly with a Sterile 0.22um Filter/Syringe filter directly into a Sterile Vial/Media Bottle
Filter the Destilled water with a NEW (Different)*Sterile 0.22um Filter into the Vial - Keep swirling as you filter in the distilled water.
Shake the Winstrol in the Vial/Media Bottle vigorously for a few minutes.
BOOM! You now have 10ml of Stanozolol / Winstrol Suspension @ 100mg/ml
NOTE: Your final solution will look a little foamy or airty. After you have shaken it vigorously let it sit untouched for 3 days. You will see it settle and the water become seperate on top, this is usual. This will not ve very micronised and settling out will take days so do not be concerned.

What is the full steroid cycle ?

Leslee/ Sales Rep.

Email: leslee.li@landmarkchem.com

Skype: landmark-leslee

Landmark Nutraceuticals Co., Limited

More and more bodybuilders are using steroids, but they know little about steroid cycle. 

The key components to a complete steroid cycle are: 

1.  Front end loading-this cuts down on wasted time in the beginning of your cycle waiting for the doses to reach full therapeutic levels . The use of orals in the beginning of a cycle is a popular component of a cycle. While it is not a necessity, it too is a (different) type of front end load. For the advanced Bodybuilder, Dbol should be taken in the beginning of a cycle as well as loading the injectables since the anabolic response from Dbol is alleged to be by a different mechanism than most injectables. If one had to chose between a Dbol load and and injectable load, in most cases, the injectable load should be preferred over the Dbol load.
2.  Injection frequency- This is crucial to obtaining even blood concentrations of androgens. Ideally, the more often injected, the better. An acceptable rule of thumb is "inject at half of the half life." For instance, if the half life of a steroid is 7 days, this should be injected at least twice weekly. For cycles that involve multiple injectables, the injections should be fractioned out and divided up based on the injectable with the shortest half life. For instance, if you were doing a test propionate and deca cycle, the old school way to do it would be to inject the prop EOD and the deca once a week. Both compounds should not be viewed as separate, but together with total androgen concentration taken into consideration. If you injected the deca only once a week, probably along with one of the propionate injections, that day will have a much larger spike on total blood androgen concentrations. Instead, the deca should be split up and taken with the propionate injections, EOD. This way there is no one day of the week that has a "spike" and even blood concentrations are maintained throughout the week. 
3. 3) Ending the cycle- Switching to shorter esters toward the end of a cycle makes perfect sense however not too many guys incorporate this practice- perhaps because of the lack of variety of drugs. The modern cycle should include replacing long ester injectables with shorter ones so that recovery time is made more efficient. The necessity of switching to shorter esters toward the end of a cycle depends on the type of drugs used. Longer esters such as deca and equipoise should be replaced with shorter acting versions of these compounds no later than four weeks before the end of a cycle. Medium length esters such as t-enanthate and cypionate should be replaced no later than three weeks before the end of a cycle. A couple examples of appropriate replacements are: trenbolone acetate and testosterone propionate. There is no need to "load" these compounds in the middle of a cycle since 1) they are already "fast acting" and 2) blood androgen concentrations are already high.
4. 4) Recovery With the replacement of the faster acting injectables toward the end of a cycle, the "wasted" time between the end of a cycle and beginning of clomid therapy is reduced. For instance, if 100mg TA is used ED, clomid therapy may begin in as little as 5 days after the last shot. This tremendously improves time efficiency. Clomid Or post cycle therapy usually last for four weeks.

When the above recommendations are made, your cycle itself is made much more efficient and if recovery time is made more efficient as well, time "off" AAS may very well be reduced so that the overall efficiency of AAS use over time is tremendously improved.

Convert Steroid Powders into an Injectable form

Leslee/ Sales Rep.

Email: leslee.li@landmarkchem.com

Skype: landmark-leslee

Landmark Nutraceuticals Co., Limited

A how to version of converting steroid powders into an injectable form with pictures. This steroid conversion is meant for the longer estered anabolic steroids such as deca durabolin, testosterone enanthate, trenbolone enanthate etc. This is a very easy conversion method. Please keep your area as sterile as possible, The more sterile you are when converting steroids, the less chance you have for a bacteria released abscess.
Also. Please make sure you know the laws in your country pertaining to steroids. 

Step 1
Weigh out 10 grams of steroid powders
This will create 40mls at 250/ml of powders such as deca, tren enanthate, test enanthate

Step 2 

Add Solvents and oil to the Beaker 

24.50 mls of oil (preferred is grape seed oil) 

0.80mls BA = benzyl alcohol

7.20mls BB = benzyl benzoate 

Step 3 

Add Your steroid powder to the Beaker containing oil and solvents 

Step 4 Stir steroid powder into solution 

Step 5 

Using a pan slightly filled with water. Warm the solution until everything becomes clear

Step 6A view from the bottom of the beaker showing clear steroid solution 

Step 7 Attach 22guage needle to the whatman syringe filter 

Step 8 Swab the top of the vial with alcohol wipes to sterilize it 

Step 9 Insert the 20guage syringe filtered needle into the septum of the vial (the rubber piece) 

Step 10 Insert the second need;e tip into the septum to vent the pressure that will build from injecting the solution into the vial 

Step 11 
Draw up the warmed solution. Having it warmed will speed up the process and make it easier to filter 

Step 12 Attach the barrel of the syring to the whatman syringe filter. push the solution through the whatman syringe filter into the sterile vial. Use constant pressure. It will only trickle. Be sure not to apply immense pressure as that will split the syringe filter and you will have a mess everywhere 

Step 13 

Detach the syringe barrel from the whatman syringe filter and draw up another 10mls of your steroid solution. Reattach to the syring filter and filter it into the new sterile vial. . 
If using 10ml vials, Just repeat steps 9 thru 12 filtering 10mls of the solution in each of the vials

Final product Your choice as to which size vial you use. You will end up with either One 40ml vial or Two 20ml vials or Four 10mls vials at 250mg/ml